Driver Information Center, (DIC) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. Also provides fuel economy reporting by average, instant, and trip.)
Floor mats
Seat, front high back bucket driver and passenger tricoat cloth covered reclining high back driver seat with single two occupant fold down passenger seat (STD)
Windows, power
GVWR, 14,500 lbs. (6577 kg)
Exhaust, single horizontal outlet
Headlamp washer system
Frame, ladder-type channel frame. Full C section straight frame 33.5" (85.1 cm) wide.
Engine, Diesel 5.2L 4 cylinder 215 hp [160.3 kW] @2500 rpm, 452 lb-ft of torque [612.8 Nm] @ 1850-2750 rpm (Governed). 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system and engine cruise control. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected (STD)
Cup holders
Daytime Running Lamps
Transmission, 6-speed automatic Aisin A465 transmission with fifth and sixth gear overdrive with lock up in 2nd, 3rd, 4th, 5th and 6th, PTO capability automatic torque converter lockup in stationary PTO mode. (STD)
Front suspension, 6,830 lbs. (3098 kg) tapered leaf, semi-elliptical steel alloy. Includes shock absorbers and stabilizer bar.
Cruise control, electronic, automatic
Front axle, 6,830 lbs. (3098 kg), reverse Elliot "I"-beam includes integral hydraulic power steering with an 18.8-20.9:1 gear ratio (Standard on 4500 HD and 4500 XD only.)
Air cleaner, heavy-duty, 11" diameter dry paper single element. Air cleaner canister standard with air restriction gauge. Back of cab location.
Assist steps
Rear Suspension, 9,880 lbs. (4481kg), tapered leaf spring with shock absorbers (Standard on 4500 HD only.)
Stake Pockets on 24” Centers & Accepts 2" x 4" Lumber
Bulkhead Type
With Window
Bulkhead Height
52"
Side Type
Stake Racks
Side Material
Steel
Side Height
40"
Bumper Type
ICC
Alarm Type
Back Up
Versa-Line Stake Body Features
• 30” to 40” stake sides
• Stake pockets will accept 2” x 4” lumber
• Slats are made of ribbed steel for strength & durability (Optional
wood slats are available.)
• Swing gate & hold down latch are standard
• Latch assembly secures corners and sides for less noise &
more cargo protection
• Floors feature CCA treated water repellent 2” tongue and groove floor boards
(Optional smooth or treadplate steel is available.)
• 5” x 10 gauge steel side & end rails
• 3” structural channel crossmembers on 12” centers
• Structural channel longsills (6” to 8”) are gussetted to every crossmember
for strength
• Front & rear crossmembers give added floor strength
• Body is hoist compatible
• Standard sizes available from 7’ x 78” to 24’ x 96” (Others upon request)
Available in 3 Days if acquired through dealer trade (subject to presale) or contact dealer for an estimated time to order from manufacturer.
Disclaimer:
Contact dealer for additional discounts and rebates. Tax, title, license and dealer fees (unless itemized above) are extra. May not be available with special finance or lease offers. EPA Estimates Only.